[Journal Article]
Laser Powder Bed Fusion of Advanced High-Strength Steels : Modification of Deformation Mechanisms by Increasing Stacking Fault Energy
In: Berg- und hüttenmännische Monatshefte : BHM, 164 (3), 127-132, 2019
[DOI: 10.1007/s00501-019-0830-4]

Ewald, Simon
Schaukellis, Max
Köhnen, Patrick
Schleifenbaum, Johannes Henrich

[Journal Article]
Local laser softening of high-strength steel with an adapted intensity
In: Journal of laser applications : JLA, 31 (1), 012007, 2019
[DOI: 10.2351/1.5052147]

Vogt, Sabrina
Völl, Annika
Wollgarten, Susanne
Freese, T.
Stollenwerk, Jochen Hugo
et al.

[Journal Article]
Fast and easy fabrication methodology of Fresnel zone plates for the extreme ultraviolet and soft x-ray regions
In: Applied optics, 58 (4), 1057-1063, 2019
[DOI: 10.1364/AO.58.001057]

Schümmer, A.
Mertins, H.-Ch.
Schneider, Claus Michael
Adam, Roman
Trellenkamp, Stefan
et al.

[Journal Article]
Numerical simulation in the absorption behavior of Ti6Al4V powder materials to laser energy during SLM
In: Journal of materials processing technology, 268, 25-36, 2019
[DOI: 10.1016/j.jmatprotec.2019.01.002]

Zhang, Dongyun
Wang, Weidong
Guo, Yanwu
Hu, Songtao
Dong, Dongdong
et al.

[Journal Article]
Investigation of the Lithium-Containing Aluminum Copper Alloy (AA2099) for the Laser Powder Bed Fusion Process [L-PBF] : Effects of Process Parameters on Cracks, Porosity, and Microhardness
In: JOM : a publication of the Minerals, Metals & Materials Society (TMS), 71 (4), 1543-1553, 2019
[DOI: 10.1007/s11837-019-03367-1]

Raffeis, Iris
Adjei-Kyeremeh, Frank
Vroomen, Uwe
Suwanpinij, Piyada
Ewald, Simon
et al.

[Journal Article]
Strongly Out-of-Equilibrium Columnar Solidification During Laser Powder-Bed Fusion in Additive Manufacturing
In: Physical review applied, 11 (1), 014025, 2019
[DOI: 10.1103/PhysRevApplied.11.014025]

Boussinot, Guillaume
Apel, Markus
Zielinski, Jonas
Hecht, Ulrike
Schleifenbaum, Johannes Henrich

[Journal Article]
Cargo shuttling by electrochemical switching of core-shell microgels obtained by a facile one-shot polymerization
In: Chemical science, 10 (6), 1844-1856, 2018
[DOI: 10.1039/C8SC04369H]

Mergel, Olga
Schneider, Sabine
Tiwari, Rahul
Kühn, Philipp T.
Keskin, Damla
et al.

[Contribution to a book, Journal Article]
Laser additive manufacturing of Zn porous scaffolds : Shielding gas flow, surface quality and densification
In: Journal of materials science & technology : JMST, 35 (2), 368-376, 2018
[DOI: 10.1016/j.jmst.2018.09.065]

Wen, Peng
Qin, Yu
Chen, Yanzhe
Voshage, Maximilian
Jauer, Lucas
et al.

[Journal Article]
Additive manufactured WE43 magnesium: A comparative study of the microstructure and mechanical properties with those of powder extruded and as-cast WE43
In: Materials characterization, 147, 384-397, 2018
[DOI: 10.1016/j.matchar.2018.11.011]

Zumdick, Naemi Aimée
Jauer, Lucas
Kersting, Lisa C.
Kutz, Tatiana Nicole
Schleifenbaum, Johannes Henrich
et al.

[Journal Article]
Spatially Resolved Spectroscopic Extreme Ultraviolet Reflectometry for Laboratory Applications
In: Journal of nanoscience and nanotechnology, 19 (1), 562-567, 2019
[DOI: 10.1166/jnn.2019.16470]

Tryus, Maksym
Herbert, Stefan
Wilson, Daniel
Bahrenberg, Lukas
Danylyuk, Serhiy
et al.

[Contribution to a book, Journal Article]
Porous structure design and fabrication of metal-bonded diamond grinding wheel based on selective laser melting (SLM)
In: The international journal of advanced manufacturing technology, 100 (5/8), 1451-1462, 2018
[DOI: 10.1007/s00170-018-2734-y]

Tian, Chenchen
Li, Xuekun
Zhang, Shubo
Guo, Guoqiang
Ziegler, Stephan
et al.

[Journal Article]
Study of nickel-based super-alloys Inconel 718 and Inconel 625 in high-deposition-rate laser metal deposition
In: Optics & laser technology, 109, 352-360, 2018
[DOI: 10.1016/j.optlastec.2018.08.003]

Zhong, Chongliang
Kittel, Jochen
Gasser, Andres
Schleifenbaum, Johannes Henrich

[Dissertation / PhD Thesis]
Digitale photonische Produktion, II, 102 Seiten : Illustrationen, Diagramme, 2018

Hinke, Christian Rüdiger

[Book, Dissertation / PhD Thesis]
Emissionscharakteristik von XUV-Strahlungsquellen bei Wellenlängen im Spektralbereich zwischen 2 und 10 nm, iv, 132 Seiten : Illustrationen, Diagramme, 2018

von Wezyk, Alexander

[Abstract, Contribution to a conference proceedings]
Biodegradable Zn metal implants manufactured by laser powder bed fusion
In: Abstract Book : 10th Biometal Symposium on Biodegradable Metals for Biomedical Applications, August 26 - 31 St. Catherine's College, University of Oxford, United Kingdom / abstract book team: Sergio Loffredo, Ana Laura Ramirez-Ledesma, Met-26, 1 Seite, 2018

Qin, Yu
Wen, Peng
Chen, Yanzhe
Jauer, Lucas
Voshage, Maximilian Alfons
et al.

[Contribution to a conference proceedings]
Characterization of additively manufactured metal flexure hinges
In: 2018 ASPE and euspen Summer Topical Meeting Advancing Precision in Additive Manufacturing : July 22-25, 2018 : proceedings / euspen ; American Society for Precision Engineering ; co-chairs: John S. Taylor (University of North Carolina, Charlotte), Richard K. Leach (University of Nottingham, UK), 101-103, 2018

Kimm, Martin
Schuekler, P.
Corves, Burkhard
Schleifenbaum, Johannes Henrich
Schoenen, D.

[Abstract, Contribution to a conference proceedings]
Process Chain for Additive Manufacturing of Magnesium Implants
In: eCM Online Periodical , 2018, Collection 6, Met-25, 1 Seite, 2018

Jauer, Lucas
Kimm, Martin
Labude, Norina
Bienert, M.
Neuß, S.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Microstructure of WE43 fabricated by Laser-Powder Bed Fusion in comparison to conventional processing routes
In: eCM Meeting Abstracts. - 2018, Collection 6, 21, 2018

Berger, L.
Bär, F.
Jauer, Lucas
Schäublin, R.
Schleifenbaum, Johannes Henrich
et al.

[Dissertation / PhD Thesis]
Bildgebung im kurzwelligen Spektralbereich zur Inspektion von Nanodefekten, 1 Online-Ressource (v, 148 Seiten) : Illustrationen, Diagramme, 2018

Herbert, Stefan

[Book, Dissertation / PhD Thesis]
Anwendungsspezifische Prozessführung des Selective Laser Melting am Beispiel von AlSi-Legierungen im Automobilbau, ii, 215 Seiten : Illustrationen, Diagramme, 2018

Meixlsperger, Maximilian

[Contribution to a book, Contribution to a conference proceedings]
Comparison of material specific rim zone effects of Ti6Al4V machined by wire EDM in water- and CH- based dielectrics
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / Edited by Fengzou Fang, 238-243, 2018

Klocke, Fritz
Smeets, Gregor Gabriel
Kittel, Mario
Olivier, Marcel Christoph
Hama-Saleh, Rebar
et al.

[Contribution to a book, Contribution to a conference proceedings]
Einfluss des Einfallswinkels der Laserstrahlung auf die Positionsabhängigkeit der Bauteilqualität im L-PBF-Prozess
In: Rapid.Tech + FabCon 3.D - International Trade Show & Conference for Additive Manufacturing : Proceedings of the 15th Rapid.Tech Conference, Erfurt, Germany, 5-7 June 2018 / Michael Kynast, Michael Eichmann, Gerd Witt (Hrsg.), 198-216, 2018
[DOI: 10.3139/9783446458123.013]

Schniedenharn, Maximilian
Schleifenbaum, Johannes Henrich

[Contribution to a conference proceedings]
Additive manufacturing processes in fluid power - properties and opportunities demonstrated at a flow-optimized fitting
In: Proceedings of 2018 International Conference on Hydraulics and Pneumatics - HERVEX : November 7-9, Băile Govora, Romania, 12-23, 2018

Matthiesen, Gunnar
Merget, Daniel
Rückert, Marcel
Schmitz, Katharina
Schleifenbaum, Johannes Henrich

[Contribution to a book, Contribution to a conference proceedings]
Diamond lenses enable ultra-compact and lightweight laser processing heads
In: [Proceedings of the 90th Laser Materials Processing Conference : 2018-12-10 - 2018-12-11, Tokyo, Japan], S. 135-138, 2018

Traub, Martin
Holly, Carlo
Di Meo, Angelo
Arntz, Dennis
Hesker, Mario
et al.

[Dissertation / PhD Thesis]
Modellierung und Simulation der Degradation Mikrogel-funktionalisierter Fasern aus Polyester, 1 Online-Ressource (VIII, 163 Seiten) : Illustrationen, Diagramme, 2018

Bürgermeister, Lisa

[Contribution to a conference proceedings]
Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steel AISI M50 with Base Plate Preheating System
In: [Metal Additive Manufacturing Conference, MAMC 2018, 2018-11-21 - 2018-11-23, Wien, Austria], 2018

Saewe, Jasmin
Gayer, Christoph
Vogelpoth, Andreas
Kunz, Johannes
Broeckmann, Christoph
et al.

[Contribution to a book, Contribution to a conference proceedings]
Comparison of material specific rim zone effects of Ti6Al4V machined by wire EDM in water- and CH- based dielectrics
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / Edited by Fengzou Fang, 238-243, 2018
[DOI: 10.1016/j.procir.2018.05.064]

Klocke, Fritz
Smeets, Gregor Gabriel
Kittel, Mario
Olivier, Marcel Christoph
Hama-Saleh, Rebar
et al.

[Book, Dissertation / PhD Thesis]
Laser Powder Bed Fusion von Magnesiumlegierungen, 1 Online-Ressource (II, 165 Seiten) : Illustrationen, Diagramme, 2018

Jauer, Lucas

[Contribution to a book, Contribution to a conference proceedings]
Holographic masks for computational proximity lithography with EUV radiation
In: International Conference on Extreme Ultraviolet Lithography 2018 : 17-20 September 2018, Monterey, California, United States / Kurt G. Ronse, Eric Hendrickx, Patrick P. Naulleau, Paolo A. Gargini, Toshiro Itani (editors) ; sponsored by: SPIE, 2018
[DOI: 10.1117/12.2502879]

Deuter, Valerie
Grochowicz, Maciej
Brose, Sascha
Biller, J.
Danylyuk, Serhiy
et al.

[Dissertation / PhD Thesis]
Laserbasierte Herstellung funktionaler Beschichtungen aus partikulärem Polyetheretherketon, 1 Online-Ressource (III, 159, A-15 Seiten) : Illustrationen, Diagramme, 2018

Sändker, Hendrik

[Book, Dissertation / PhD Thesis]
Simulation hochdynamischer Vorgänge in der Schmelze beim Laserstrahlschneiden, vi, 131 Seiten : Illustrationen, Diagramme, 2018

Halm, Ulrich

[Contribution to a book, Contribution to a conference proceedings]
Actinic tools for EUV resist characterization in research and production
In: International Conference on Extreme Ultraviolet Lithography 2018 : 17-20 September 2018, Monterey, California, United States / Kurt G. Ronse, Eric Hendrickx, Patrick P. Naulleau, Paolo A. Gargini, Toshiro Itani (editors) ; sponsored by: SPIE, UNSP 108091V, 2018
[DOI: 10.1117/12.2501800]

Lebert, Rainer
Missalla, T.
Phiesel, Christoph
Piel, Christian
Brose, Sascha
et al.

[Contribution to a conference proceedings]
Improving the Fatigue Strength of L-PBF Manufactured IN718 Samples by HIP Post Processing
In: [World Congress on Powder Metallurgy, World PM2018, 2018-09-16 - 2018-09-20, Beijing, Peoples R China], 1665-1672, 2018

Kaletsch, Anke
Heine, Luisa-Marie
Kunz, Johannes
Bremen, Sebastian
Schleifenbaum, Johannes Henrich
et al.

[Contribution to a book, Contribution to a conference proceedings]
Influence Of Powder Bed Temperature On Microstructure And Post Heat Treatment Of High Speed Steel AISI M50 Processed By Laser-Powder Bed Fusion
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 2018

Kunz, Johannes
Herzog, Simone
Kaletsch, Anke
Saewe, Jasmin
Gayer, Christoph
et al.

[Journal Article]
Qualitätsüberwachung von laserverschweißten Tapes aus faserverstärkten Kunststoffen mittels Thermographie
In: Joining plastics = Fügen von Kunststoffen, 12 (3), 160-165, 2018

Lanfermann, Andrea
Abels, Peter
Gomer, Andreas
Schomburg, Werner

[Contribution to a book, Contribution to a conference proceedings]
Glass cutting optimization with pump-probe microscopy and Bessel beam profiles
In: Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XVIII : 28-30 January 2018, San Francisco, California, United States / Peter R. Herman, Michel Meunier, Roberto Osellame (editors) ; sponsored by: SPIE, 2018
[DOI: 10.1117/12.2289943]

Jenne, Michael
Flamm, Daniel
Ouaj, Taoufiq
Hellstern, Julian
Grossmann, Daniel
et al.

[Contribution to a book, Contribution to a conference proceedings]
Advanced in-situ diagnostics of ultra short pulsed micromachining in glass
In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII : 29-31 January 2018, San Francisco, California, United States / Beat Neuenschwander, Costas P. Grigoropoulos, Tetsuya Makimura, Gediminas Račiukaitis (editors) ; sponsored by: SPIE, 105190C, 2018
[DOI: 10.1117/12.2289801]

Grossmann, Daniel
Jenne, Michael
Flamm, Daniel
Kleiner, Jonas
Zimmermann, Felix
et al.

[Journal Article]
Multi Pulse Pump-Probe Diagnostics for Development of Advanced Transparent Materials Processing
In: Journal of Laser Micro/Nanoengineering, 13 (3), 273-279, 2018
[DOI: 10.2961/jlmn.2018.03.0022]

Jenne, Michael
Zimmermann, F.
Flamm, D.
Großmann, D.
Kleiner, J.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Development of an adaptive laser beam shaper
In: Laser Resonators, Microresonators, and Beam Control XX : 29 January-1 February 2018, San Francisco, California, United States / Alexis V. Kudryashov, Alan H. Paxton, Vladimir S. Ilchenko (editors) ; sponsored and published by: SPIE, UNSP 1051819, 2018
[DOI: 10.1117/12.2287577]

König, Hans-Georg
Pütsch, Oliver
Lange, Felix Rolf Lutz
Stollenwerk, Jochen Hugo
Loosen, Peter

[Journal Article]
50 years of the Laser Institute of America
In: Journal of laser applications : JLA, 30 (4), 041001, 2018
[DOI: 10.2351/1.5056768]

Poprawe, Reinhart
Brandt, Milan
Quick, Nathaniel R.
Solis, Brian H.
Lu, Yongfeng

[Contribution to a book, Contribution to a conference proceedings]
Development of Adapted Ni-738 Powder for Additive Manufacturing
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 2018

Vogekpoth, Andreas
Sharma, Satyajeet
Schleifenbaum, Johannes Henrich

[Contribution to a book, Contribution to a conference proceedings]
Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steels
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 2018

Saewe, Jasmin
Gayer, Christoph
Jauer, Lucas
Kunz, Johannes
Broeckmann, Christoph
et al.

[Contribution to a book, Contribution to a conference proceedings]
Additive Manufacturing of Honeycombs Seal Strips
In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition - 2018 : presented at the ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, June 11-15, 2018, Oslo, Norway / sponsored by the International Gas Turbine Institute Volume 2: Turbomachinery, V02DT46A023, 8 Seiten, 2018
[DOI: 10.1115/GT2018-77081]

Geisen, Ole
Kersting, Lisa
Masseling, Lukas
Bogner, Jan Pascal
Schleifenbaum, Johannes Henrich

[Contribution to a book, Contribution to a conference proceedings]
Increasing productivity of ultrashort pulsed laser ablation for commercialization of micro structuring
In: Nanoengineering: Fabrication, Properties, Optics, and Devices XV : 21-23 August 2018, San Diego, California, United States / Balaji Panchapakesan, Anne E. Sakdinawat, André-Jean Attias, Elizabeth A. Dobisz (editors) ; sponsored and published by: SPIE, 107300H, 2018
[DOI: 10.1117/12.2319741]

Brenner, Andreas
Bornschlegel, Benedikt
Finger, Johannes

[Book, Dissertation / PhD Thesis]
Laserstrahl-Bohren von CFK-Preforms, 1 Online-Ressource (VI, 156 Seiten) : Illustrationen, 2018

Janssen, Stefan

[Journal Article]
Design of high-manganese steels for additive manufacturing applications with energy-absorption functionality
In: Materials and design, 160, 1250-1264, 2018
[DOI: 10.1016/j.matdes.2018.10.051]

Kies, Fabian Martin
Köhnen, Patrick
Wilms, Markus B.
Brasche, Frederike Lina
Pradeep, Konda Gokuldoss
et al.

[Journal Article]
Visualization of the shielding gas flow in SLM machines by space-resolved thermal anemometry
In: Rapid prototyping journal, 24 (8), 1296-1304, 2018
[DOI: 10.1108/RPJ-07-2017-0149]

Schniedenharn, Maximilian
Wiedemann, Frederik
Schleifenbaum, Johannes Henrich

[Journal Article]
Laser-structured high performance PVD coatings
In: Surface and coatings technology, 352, 302-312, 2018
[DOI: 10.1016/j.surfcoat.2018.07.094]

Bobzin, Kirsten
Brögelmann, Tobias
Gillner, Arnold
Kruppe, Nathan Christopher
He, Chao
et al.

[Contribution to a conference proceedings]
Transient spatially resolved irradiation for responding to varying thermal conditions in thermoplastic tape placement
In: [Sampe Conference 18 Southampton], 2018

Striet, Philipp
Weiler, Thomas
Emonts, Michael Gustav
Völl, Annika
Stollenwerk, Jochen Hugo
et al.

[Contribution to a book, Contribution to a conference proceedings]
Probing the potential of structured and surface functionalized tools for dry cold forging of aluminium
In: 5th International Conference on New Forming Technology (ICNFT 2018) : Bremen, Germany, September 18-21, 2018 / F. Vollertsen, T.A. Dean, Y. Qin and S.J. Yuan (eds.), 14010, [1]-7, 2018
[DOI: 10.1051/matecconf/201819014010]

Teller, Marco
Roß, Ingo
Prünte, Stephan
Temmler, André
Küpper, Moritz Emanuel
et al.